안녕하세요, 후사이언티픽입니다. 제약 품질관리, 잔류용매 시험, Extractables & Leachables(E&L) 분석, HPLC 및 GC 분석 업무에서 사용되는 USP Reference Standard 및 Analytical Reference Material 공급 품목을 안내드립니다.
USP 표준품은 시험법 검증, 시스템 적합성 확인, 정량 분석, 규격 시험, 원료 및 완제품 품질관리에 폭넓게 사용됩니다. 특히 Acetonitrile CAS 75-05-8, Tetrahydrofuran CAS 109-99-9, N-Methylpyrrolidone CAS 872-50-4 등 잔류용매 표준품은 HPLC, GC, Headspace GC, LC-MS, GC-MS 분석에서 꾸준히 문의되는 분석용 시약입니다.
후사이언티픽은 USP Reference Standard, Analytical Reference Material, 잔류용매 표준품, 플라스틱 첨가제 표준품, 고분자 표준품, Melting Point Standard, 미생물 관련 표준품, E&L System Suitability Standards 등 다양한 실험실 시약과 연구용 시약에 대해 견적 및 납기 확인을 지원합니다.
제품
아래 표는 제공된 자료에 포함된 전체 USP General Chapters 관련 제품을 누락 없이 정리한 목록입니다. 제품명, 제품번호, CAS No., 용량, 분자식, 제품 구분, 재고/입고 정보, 표시 가격을 함께 확인할 수 있습니다.
| No. | 제품명 | 제품번호 | CAS No. | 용량 | 제품 구분 |
|---|---|---|---|---|---|
| 1 | Residual Solvent Class 2 - Tertiary Butyl Alcohol (1.2 mL/ampule; 3 ampules) | 1601758 | 75-65-0 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 2 | Residual Solvent Class 2 - 2-Methoxyethanol (1.2 mL/ampule; 3 ampules) | 1601645 | 109-86-4 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 3 | Residual Solvent Class 2 - Methylbutylketone (1.2 mL/ampule; 3 ampules) | 1601667 | 591-78-6 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 4 | tert-Butylmethyl ether (1.2 mL/ampule; 3 ampules) | 1083303 | 1634-04-4 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 5 | Acetone (1.5 mL/ampule; 3 ampules) | 1006801 | 67-64-1 | 1.5 mL/ampule; 3 ampules | Reference Standard |
| 6 | Residual Solvent Class 2 - Methylcyclohexane (1.2 mL/ampule; 3 ampules) | 1601689 | - | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 7 | Homopolymer Polypropylene (3 Strips, 2'' x 2 1/2'' each) | 1311306 | 9003-07-0 | 3 Strips, 2'' x 2 1/2'' each | Reference Standard |
| 8 | Residual Solvent Class 2 - 1,2-Dichloroethene (1.2 mL/ampule; 3 ampules) | 1601420 | 540-59-0 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 9 | N-(2-Benzoylphenyl)-4-methylbenzenesulfonamide (100 mg) (2-(p-Toluenesulfonamido)benzophenone) | 1800128 | 1859-71-8 | 100 mg | Analytical Reference Material |
| 10 | Residual Solvent Class 2 - N-Methylpyrrolidone (1.2 mL/ampule; 3 ampules) | 1601703 | 872-50-4 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 11 | Residual Solvents Class 2 - Mixture B (1.2 mL/ampule; 3 ampules) | 1601292 | - | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 12 | Squalene (25 mg) ((6E,10E,14E,18E)-2,6,10,15,19,23-Hexamethyltetracosa-2,6,10,14,18,22-hexaene) | 1800225 | 111-02-4 | 25 mg | Analytical Reference Material |
| 13 | Alcohol Determination--Acetonitrile (5 x 5 mL) | 1012699 | 75-05-8 | 5 x 5 mL | Reference Standard |
| 14 | Elemental Impurities Class 1 and 2A Mixture (120 mL) | 1234410 | N/A | 120 mL | - |
| 15 | Isopropyl Palmitate (500 mg) | 1350603 | 142-91-6 | 500 mg | Reference Standard |
| 16 | Residual Solvent Class 2 - Sulfolane (1.2 mL/ampule; 3 ampules) | 1601769 | 126-33-0 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 17 | Residual Solvents Class 2 - Mixture C (1.2 mL/ampule; 3 ampules) | 1601306 | - | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 18 | Methylpyrrolidone (2 g) | 1437202 | 872-50-4 | 2 g | Reference Standard |
| 19 | 2,2'-(1,4-Phenylene)bis(3,1-benzoxazin-4-one) (25 mg) (2,2'-(1,4-Phenylene)bis[4H-3,1-benzoxazin-4-one]) | 1800129 | 18600-59-4 | 25 mg | Analytical Reference Material |
| 20 | 1,3-Diazocane-2-thione (25 mg) (1,3-diazocane-2-thione) | 1800136 | 5269-85-2 | 25 mg | Analytical Reference Material |
| 21 | Dissolution Performance Verification Standard - Prednisone (30 tablets) | 1222818 | 53-03-2 (Prednisone) | 30 tablets | Reference Standard |
| 22 | Lauryl Acrylate (25 mg) (Dodecyl acrylate) | 1800163 | 2156-97-0 | 25 mg | Analytical Reference Material |
| 23 | Butylphenyl Methylpropional (25 mg) (3-(4-tert-Butylphenyl)-2-methylpropanal) | 1800220 | 80-54-6 | 25 mg | Analytical Reference Material |
| 24 | Elemental Impurities Class 2B Mixture (120 mL) | 1234427 | N/A | 120 mL | - |
| 25 | Benzyl Cinnamate (25 mg) (3-Phenyl-2-propenoic acid benzyl ester) | 1800189 | 103-41-3 | 25 mg | Analytical Reference Material |
| 26 | Residual Solvent Class 2 - Tetrahydrofuran (1.2 mL/ampule; 3 ampules) | 1601770 | 109-99-9 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 27 | Residual Solvent Class 2 - Acetonitrile (1.2 mL/ampule; 3 ampules) | 1601340 | 75-05-8 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 28 | Hexadecyl Acrylate (25 mg) (2-Propenoic acid, hexadecyl ester) | 1800154 | 13402-02-3 | 25 mg | Analytical Reference Material |
| 29 | 1,4-Bis(trimethylsilyl)benzene (25 mg) (p-Bis(trimethylsilyl)benzene) | 1800122 | 13183-70-5 | 25 mg | Analytical Reference Material |
| 30 | Acetanilide Melting Point Standard (1g) (Approximately 114 degrees) | 1004001 | 103-84-4 | - | Reference Standard |
| 31 | Desiccant, Medium (2 pouches (approximate weight 80 grams, each)) | 1613021 | 1318-02-1 | - | Reference Standard |
| 32 | Padimate O (300 mg) | 1491503 | 21245-02-3 | 300 mg | Reference Standard |
| 33 | Tetraethylene Glycol (25 mg) (2,2'-[Oxybis(2,1-ethanediyloxy)]bis[ethanol]) | 1800193 | 112-60-7 | 25 mg | Analytical Reference Material |
| 34 | Acetophenone (25 mg) (Methyl phenyl ketone) | 1800223 | 98-86-2 | 25 mg | Analytical Reference Material |
| 35 | Elemental Impurities Class 3 Mixture (120 mL) | 1234431 | N/A | 120 mL | - |
| 36 | Triacontyl Acetate (25 mg) (Triacontyl acetate) | 1800164 | 41755-58-2 | 25 mg | Analytical Reference Material |
| 37 | High-Density Polyethylene (3 strips (2'' x 2 1/2'' each)) | 1546707 | 9002-88-4 | - | Reference Standard |
| 38 | 3-Methylpentane (25 mg) (3-Methylpentane) (COLD SHIPMENT REQUIRED) | 1800172 | 96-14-0 | 25 mg | Analytical Reference Material |
| 39 | Polyvinyl Chloride, Plasticized (3 Strips, 2'' x 2 1/2'' each) | 1544916 | 9002-86-2 | 3 Strips, 2'' x 2 1/2'' each | Reference Standard |
| 40 | E-Phytol (25 mg) ((7R,11R,E)-3,7,11,15-tetramethylhexadec-2-en-1-ol) | 1800158 | 150-86-7 | 25 mg | Analytical Reference Material |
| 41 | Residual Solvent Class 2 - Tetralin (1.2 mL/ampule; 3 ampules) | 1601780 | 119-64-2 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 42 | Residual Solvent Class 2 - Chloroform (1.2 mL/ampule; 3 ampules) | 1601383 | 67-66-3 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 43 | Plastic Additive 18 (5 x 25 mg) | 1545090 | 64685-81-0 | 5 x 25 mg | Reference Standard |
| 44 | 2-Methyltetrahydrofuran (1.2 mL/ampule; 3 ampules) | 1438010 | 96-47-9 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 45 | Isopulegol (25 mg) ((1R,2S,5R)-5-Methyl-2-(prop-1-en-2-yl)cyclohexan-1-ol) | 1800234 | 89-79-2 | 25 mg | Analytical Reference Material |
| 46 | Caffeine Melting Point Standard (1 g) (Approximately 236 degrees) | 1086006 | 58-08-2 | 1 g | Reference Standard |
| 47 | Low-Density Polyethylene (3 strips) | 1546809 | 9002-88-4 | 3 strips | Reference Standard |
| 48 | Dibutyl Phthalate (200 mg) | 1187080 | 84-74-2 | 200 mg | Reference Standard |
| 49 | Desiccant, Large (2 pouches (approximate weight 80 grams, each)) | 1613032 | 1318-02-1 | - | Reference Standard |
| 50 | Octacosane (100 mg) (n-Octacosane) | 1800217 | 630-02-4 | 100 mg | Analytical Reference Material |
| 51 | Anthraquinone (100 mg) (Anthracene-9,10-dione) | 1800208 | 84-65-1 | 100 mg | Analytical Reference Material |
| 52 | Phenanthrene (25 mg) (Phenanthrene) | 1800181 | 85-01-8 | 25 mg | Analytical Reference Material |
| 53 | Farnesane (25 mg) (2,6,10-trimethyldodecane) | 1800215 | 3891-98-3 | 25 mg | Analytical Reference Material |
| 54 | Plastic Additive 15 (100 mg) | 1545067 | 8013-07-8 | 100 mg | - |
| 55 | 2-Ethylhexyl Acrylate (25 mg) (2-Ethylhexyl 2-propenoate) | 1800224 | 103-11-7 | 25 mg | Analytical Reference Material |
| 56 | Cyclomethicone 7 (25 mg) (2,2,4,4,6,6,8,8,10,10,12,12,14,14-tetradecamethyl-1,3,5,7,9,11,13-heptaoxa-2,4,6,8,10,12,14-heptasilacyclotetradecane) | 1800192 | 107-50-6 | 25 mg | Analytical Reference Material |
| 57 | Residual Solvent Class 2 - 1,2-Dimethoxyethane (1.2 mL/ampule; 3 ampules) | 1601463 | 110-71-4 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 58 | Tris(2,4-di-tert-butylphenyl)phosphate (25 mg) (Tri(2,4-di-tert-butylphenyl) phosphate) | 1800184 | 95906-11-9 | 25 mg | Analytical Reference Material |
| 59 | Cumene (1.2 mL/ampule; 3 ampules) (DISCONTINUED) | 1151709 | 98-82-8 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 60 | Plastic Additive 8 (100 mg) (Dioctadecyl disulfide) | 1544993 | 2500-88-1 | 100 mg | Reference Standard |
| 61 | Residual Solvent Class 2 - 1,4-Dioxane (1.2 mL/ampule; 3 ampules) | 1601521 | 123-91-1 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 62 | Octadecamethylcyclononasiloxane (25 mg) (2,2,4,4,6,6,8,8,10,10,12,12,14,14,16,16,18,18-octadecamethyl-1,3,5,7,9,11,13,15,17-nonaoxa-2,4,6,8,10,12,14,16,18-nonasilacyclooctadecane) | 1800202 | 556-71-8 | 25 mg | Analytical Reference Material |
| 63 | Heneicosane (100 mg) (n-Heneicosane) | 1800166 | 629-94-7 | 100 mg | Analytical Reference Material |
| 64 | Methyl Isobutyl Ketone (1.2 mL/ampule; 3 ampules) | 1430203 | 108-10-1 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 65 | 2-Methyloctacosane (25 mg) (2-Methyloctacosane) | 1800063 | 1560-98-1 | 25 mg | Analytical Reference Material |
| 66 | Instant Inoculator(TM) <100 MultiDose, Pseudomonas aeruginosa USP-PA1 (INTERNATIONAL COLD CHAIN SHIPMENT REQUIRED) | 1800258 | - | - | Analytical Reference Material |
| 67 | Benzethonium Chloride (500 mg) | 1051500 | 121-54-0 | 500 mg | Reference Standard |
| 68 | Potassium Nitrate (100 mg) | 1548349 | 7757-79-1 | 100 mg | Reference Standard |
| 69 | Succinic Acid Melting Point Standard (1 g) | 1623422 | 110-15-6 | 1 g | Reference Standard |
| 70 | 8-Pentadecanone (100 mg) (Pentadecan-8-one) | 1800145 | 818-23-5 | 100 mg | Analytical Reference Material |
| 71 | Triethyl Citrate (100 mg) | 1683606 | 77-93-0 | 100 mg | Reference Standard |
| 72 | Extractable & Leachable System Suitability Standards Head Space GC-MS Mixture (1 mL) | 1800491 | - | 1 mL | Analytical Reference Material |
| 73 | Residual Solvent Class 2 - Nitromethane (1.2 mL/ampule; 3 ampules) | 1601725 | 75-52-5 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 74 | Plastic Additive 4 (200 mg) (Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) | 1544950 | 2082-79-3 | 200 mg | Reference Standard |
| 75 | Docosanol (25 mg) (Behenyl alcohol) | 1800115 | 661-19-8 | 25 mg | Analytical Reference Material |
| 76 | Residual Solvent Class 2 - Xylenes (1.2 mL/ampule; 3 ampules) | 1601849 | - | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 77 | Residual Solvent Class 2 - Cumene (1.2 mL/ampule; 3 ampules) | 1601394 | 98-82-8 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 78 | Residual Solvents Mixture - Class 1 (1.2 mL/ampule; 3 ampules) (Ozone Depleting Substance) | 1601102 | - | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 79 | 8-Hexylpentadecane (25 mg) (8-hexylpentadecane) | 1800123 | 13475-75-7 | 25 mg | Analytical Reference Material |
| 80 | Near IR System Suitability (1 unit) (Dysprosium (Dy2O3), Erbium (Er2O3), Holmium (Ho2O3), talc [Mg3Si4O10(OH)2] (1:1:1:1 w/w)) | 1457844 | - | 1 unit | Reference Standard |
| 81 | Eicosyl Ferulate (25 mg) (Eicosyl 3-(4-hydroxy-3-methoxyphenyl)-2-propenoate) | 1800144 | 64190-82-5 | 25 mg | Analytical Reference Material |
| 82 | 2-Methylpentane (10 mg) (Isohexane) | 1800151 | 107-83-5 | 10 mg | Analytical Reference Material |
| 83 | Vanillin (200 mg) | 1710006 | 121-33-5 | 200 mg | Reference Standard |
| 84 | Diethyl Phthalate (200 mg) | 1193505 | 84-66-2 | 200 mg | Reference Standard |
| 85 | Isooctyl Methacrylate (25 mg) (6-Methylheptyl methacrylate) | 1800114 | 28675-80-1 | 25 mg | Analytical Reference Material |
| 86 | 2,4,6-Trimethyloctane (25 mg) (2,4,6-trimethyloctane) | 1800108 | 62016-37-9 | 25 mg | Analytical Reference Material |
| 87 | Isophorone (25 mg) (3,5,5-Trimethyl-2-cyclohexen-1-one) | 1800231 | 78-59-1 | 25 mg | Analytical Reference Material |
| 88 | Extractable & Leachable System Suitability Standards LC-MS-ESI Mixture (1 mL) | 1800493 | - | 1 mL | Analytical Reference Material |
| 89 | Rubber Oligomer 5 (5 mg) (1,1,5,5-Tetramethyl-2-(1-bromomethylethenyl)-3-(2,2,4-trimethylpentyl)-cyclohexane) | 1606225 | 2518227-14-8 | 5 mg | Analytical Reference Material |
| 90 | Benzophenone (25 mg) (Diphenylmethanone) | 1056130 | 119-61-9 | 25 mg | Reference Standard |
| 91 | 2-Methyl-1-propanol (1.2 mL/ampule; 3 ampules) | 1437053 | 78-83-1 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 92 | Ribose (300 mg) | 1603108 | 50-69-1 | 300 mg | Reference Standard |
| 93 | 2-Phenylphenol (100 mg) ([1,1'-Biphenyl]-2-ol) | 1800235 | 90-43-7 | 100 mg | Analytical Reference Material |
| 94 | Residual Solvent Class 2 - 2-Ethoxyethanol (1.2 mL/ampule; 3 ampules) | 1601543 | 110-80-5 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 95 | Tetraethylene Glycol Diacrylate (25 mg) (((oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) diacrylate) | 1800127 | 17831-71-9 | 25 mg | Analytical Reference Material |
| 96 | Residual Solvent Class 1 - 1,1,1-Trichloroethane (1.2 mL/ampule; 3 ampules) (Ozone Depleting Substance) | 1601226 | - | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 97 | 4-Acetyl-2,6-di-tert-Butylphenol (25 mg) (1-(3,5-di-tert-butyl-4-hydroxyphenyl)ethan-1-one) | 1800209 | 14035-33-7 | 25 mg | Analytical Reference Material |
| 98 | Phenyl Salicylate Melting Point Standard (1 g) (COLD SHIPMENT REQUIRED) (Approximately 41 degrees) | 1534209 | 118-55-8 | 1 g | Reference Standard |
| 99 | Ricinoleic Acid (25 mg) ((R,Z)-12-hydroxyoctadec-9-enoic acid) | 1800156 | 141-22-0 | 25 mg | Analytical Reference Material |
| 100 | Lauric Diethanolamide (25 mg) (Lauric acid diethanolamide) | 1800120 | 120-40-1 | 25 mg | Analytical Reference Material |
| 101 | Sodium Isophthalate (25 mg) (Sodium isophthalate) | 1800187 | 10027-33-5 | 25 mg | Analytical Reference Material |
| 102 | Alcohol Determination - Alcohol (5 mL/ampule; 5 ampules) | 1012688 | 64-17-5 | 5 mL/ampule; 5 ampules | Reference Standard |
| 103 | Plastic Additive 13 (100 mg) (Erucamide) | 1545045 | 112-84-5 | 100 mg | Reference Standard |
| 104 | 3-Methyl-1-butanol (1.2 mL/ampule; 3 ampules) | 1424153 | 123-51-3 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 105 | 5-Methyloctadecane (25 mg) (5-Methyloctadecane) | 1800070 | 25117-35-5 | 25 mg | Analytical Reference Material |
| 106 | Bis(2-methoxyethyl) Phthalate (25 mg) (1,2-Benzenedicarboxylic acid) | 1800118 | 117-82-8 | 25 mg | Analytical Reference Material |
| 107 | Dehydrated Alcohol (1.2 mL/ampule; 5 ampules) | 1012772 | 64-17-5 | 1.2 mL/ampule; 5 ampules | Reference Standard |
| 108 | Cinnamic Acid E/Z (100 mg) (3-Phenylacrylic acid) | 1800204 | 621-82-9 | 100 mg | Analytical Reference Material |
| 109 | Orlistat Related Compound C (25 mg) (Triphenylphosphine Oxide) | 1478833 | 791-28-6 | 25 mg | Reference Standard |
| 110 | Sulfanilamide Melting Point Standard (1 g) (Approximately 165 degrees) | 1633007 | 63-74-1 | 1 g | Reference Standard |
| 111 | Ethylene Sebacate (25 mg) (1,4-Dioxacyclotetradecane-5,14-dione) | 1800140 | 5578-82-5 | 25 mg | Analytical Reference Material |
| 112 | Residual Solvent Class 2 - N,N-Dimethylacetamide (1.2 mL/ampule; 3 ampules) | 1601485 | 127-19-5 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 113 | Heptadecane (25 mg) (Heptadecane) | 1800079 | 629-78-7 | 25 mg | Analytical Reference Material |
| 114 | N-Nitrosodiethylamine (NDEA) (1 mL (1 mg/mL)) (N-Ethyl-N-nitrosoethanamine) | 1466652 | 55-18-5 | 1 mg/mL | Reference Standard |
| 115 | Instant Inoculator(TM) <100 MultiDose, Bacillus spizizenii USP-BS1 (INTERNATIONAL COLD CHAIN SHIPMENT REQUIRED) | 1800256 | N/A | - | - |
| 116 | Dimethyl Phthalate (25 mg) (1,2-Dimethyl benzene-1,2-dicarboxylate) | 1800177 | 131-11-3 | 25 mg | Analytical Reference Material |
| 117 | Pentacosane (100 mg) | 1800142 | 629-99-2 | 100 mg | Analytical Reference Material |
| 118 | Residual Solvent Class 2 - Ethylene Glycol (1.2 mL/ampule; 3 ampules) | 1601565 | 107-21-1 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 119 | 2-Butanol (1.2 mL/ampule; 3 ampules) | 1081829 | 78-92-2 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 120 | 2-Bromopalmitic Acid (100 mg) (2-Bromohexadecanoic acid) | 1800161 | 18263-25-7 | 100 mg | Analytical Reference Material |
| 121 | Residual Solvent Class 1 - Carbon Tetrachloride (1.2 mL/ampule; 3 ampules) (Ozone Depleting Substance) | 1601168 | 56-23-5 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 122 | Sucrose (100 mg) | 1623637 | 57-50-1 | 100 mg | Reference Standard |
| 123 | Isopropyl Acetate (1.2 mL/ampule; 3 ampules) | 1350104 | 108-21-4 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 124 | Silicone Elastomer (2 Strips, 2"" x 2 1/2"" each) | 1612663 | 63394-02-5 | 2 Strips, 2"" x 2 1/2"" each | - |
| 125 | 2-Methylhexacosane (25 mg) (2-methylhexacosane) | 1800087 | 1561-02-0 | 25 mg | Analytical Reference Material |
| 126 | Isobutyl Acetate (1.2 mL/ampule; 3 ampules) | 1347802 | 110-19-0 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 127 | Erucic Acid (25 mg) ((13Z)-13-Docosenoic acid) (COLD SHIPMENT REQUIRED) | 1800059 | 112-86-7 | 25 mg | Analytical Reference Material |
| 128 | Citronellyl Propionate (25 mg) (3,7-dimethyloct-6-en-1-yl propionate) | 1800155 | 141-14-0 | 25 mg | Analytical Reference Material |
| 129 | Rubber Oligomer 2 (5 mg) (2-(3-chloroprop-1-en-2-yl)-1,1,5,5-tetramethylcyclohexane) | 1606222 | 63216-72-8 | 5 mg | Analytical Reference Material |
| 130 | Hexaoxyethylene Glycol (25 mg) (3,6,9,12,15-Pentaoxaheptadecan-1,17-diol) | 1800089 | 2615-15-8 | 25 mg | Analytical Reference Material |
| 131 | Tropicamide Related Compound D (15 mg) (List Chemical) (2-Phenylacetic acid) | 1699049 | 103-82-2 | 15 mg | Reference Standard |
| 132 | Plastic Additive 1 (100 mg) (Ethylene bis[3,3-bis[3-(1,1-dimethylethyl)-4-hydroxyphenyl] butanoate]) | 1544927 | 32509-66-3 | 100 mg | Reference Standard |
| 133 | Bis(hydroxyethyl) Terephthalate (25 mg) (1,4-Benzenedicarboxylic acid) | 1800149 | 959-26-2 | 25 mg | Analytical Reference Material |
| 134 | 2-Ethylhexyl Formate (25 mg) (2-ethylhexyl formate) | 1800186 | 5460-45-7 | 25 mg | Analytical Reference Material |
| 135 | Diisooctyl Maleate (25 mg) (Bis(isooctyl) maleate) | 1800227 | 1330-76-3 | 25 mg | Analytical Reference Material |
| 136 | Plastic Additive 9 (100 mg) (Didodecyl 3,3'-thiodipropionate) | 1545001 | 123-28-4 | 100 mg | Reference Standard |
| 137 | Residual Solvent Class 2 - Hexane (1.2 mL/ampule; 3 ampules) | 1601601 | 110-54-3 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 138 | Residual Solvent Class 1 - 1,2-Dichloroethane (1.2 mL/ampule; 3 ampules) | 1601180 | 107-06-2 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 139 | Phenacetin Melting Point Standard (1 g) (Approximately 135 degrees) | 1514008 | 62-44-2 | 1 g | Reference Standard |
| 140 | Cyclic Olefin Copolymer (3 strips, 2'' x 2'') | 1152825 | 26007-43-2 | 3 strips, 2'' x 2'' | - |
| 141 | Residual Solvent Class 2 - Cyclohexane (1.2 mL/ampule; 3 ampules) | 1601408 | 110-82-7 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 142 | Residual Solvent Class 1 - Benzene (1.2 mL/ampule; 3 ampules) | 1601146 | 71-43-2 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 143 | Bis(2-butoxyethyl) Adipate (25 mg) (bis(2-butoxyethyl) adipate) | 1800125 | 141-18-4 | 25 mg | Analytical Reference Material |
| 144 | Bromobenzene (25 mg) (Monobromobenzene) | 1800174 | 108-86-1 | 25 mg | Analytical Reference Material |
| 145 | Bis(4-(2-phenylpropan-2-yl)phenyl)amine (100 mg) (Bis[4-(2-phenylpropan-2-yl)phenyl]amine) | 1800188 | 10081-67-1 | 100 mg | Analytical Reference Material |
| 146 | Propyl Acetate (1.2 mL/ampule; 3 ampules) | 1576402 | 109-60-4 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 147 | Polycarbonate (3 Strips, 2'' x 2 1/2'' each) | 1546183 | 25766-59-0 | 3 Strips, 2'' x 2 1/2'' each | Reference Standard |
| 148 | Sodium Tartrate Dihydrate (500 mg/vial; 4 vials) | 1614909 | 6106-24-7 | 500 mg/vial; 4 vials | Reference Standard |
| 149 | Rubber Oligomer 3 (5 mg) (1,1,5,5-Tetramethyl-2-(1-methylethenyl)-3-(2,2,4-trimethylpentyl)-cyclohexane) | 1606223 | 2512216-71-4 | 5 mg | Analytical Reference Material |
| 150 | Anisole (1.2 mL/ampule; 3 ampules) | 1037011 | 100-66-3 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 151 | Dodecane (25 mg) (n-Dodecane) | 1800112 | 112-40-3 | 25 mg | Analytical Reference Material |
| 152 | Polyethylene Terephthalate G (PETG) (3 Strips 2''x2'' each) | 1546922 | 25640-14-6 | 3 Strips 2''x2'' each | Reference Standard |
| 153 | Ethyl Acetate (1.2 mL/ampule; 3 ampules) | 1265402 | 141-78-6 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 154 | 2-Propanol (1.2 mL/ampule; 3 ampules) | 1570428 | 67-63-0 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 155 | Hexyldecanol (25 mg) (2-hexyldecan-1-ol) | 1800131 | 2425-77-6 | 25 mg | Analytical Reference Material |
| 156 | Plastic Additive 11 (100 mg) (Copolymer of Dimethyl Succinate and (4-hydroxy-2,2,6,6-tetramethylpiperidin-1-yl)ethanol)) | 1545023 | 65447-77-0 | 100 mg | Reference Standard |
| 157 | Dinonyl Phthalate (25 mg) (1,2-Dinonyl benzene-1,2-dicarboxylate) | 1800232 | 84-76-4 | 25 mg | Analytical Reference Material |
| 158 | 2,4-Dimethyl-1-heptene (25 mg) (2,4-Dimethylhept-1-ene) | 1800067 | 19549-87-2 | 25 mg | Analytical Reference Material |
| 159 | Rubber Oligomer 6 (5 mg) (2-(3-bromoprop-1-en-2-yl)-1,1,5,5-tetramethylcyclohexane) | 1606226 | 2514965-51-4 | 5 mg | Analytical Reference Material |
| 160 | Residual Solvent Class 2 - Pyridine (1.2 mL/ampule; 3 ampules) | 1601747 | 110-86-1 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 161 | Palmitic Acid (500 mg) | 1492007 | 57-10-3 | 500 mg | Reference Standard |
| 162 | Residual Solvent Class 2 - Methylene Chloride (1.2 mL/ampule; 3 ampules) | 1601441 | 75-09-2 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 163 | Probucol (200 mg) | 1563309 | 23288-49-5 | 200 mg | Reference Standard |
| 164 | Butylated Hydroxytoluene (500 mg) | 1082708 | 128-37-0 | 500 mg | Reference Standard |
| 165 | Dioctyl Methylphosphonate (25 mg) (dioctyl methylphosphonate) | 1800162 | 1832-68-4 | 25 mg | Analytical Reference Material |
| 166 | Caprolactam (1 g) | 1091039 | 105-60-2 | 1 g | Reference Standard |
| 167 | Monobutyl Phthalate (100 mg) (2-(Butoxycarbonyl)benzoic acid) | 1800195 | 131-70-4 | 100 mg | Analytical Reference Material |
| 168 | Residual Solvents Class 2 - Mixture A (1.2 mL/ampule; 3 ampules) | 1601281 | - | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 169 | Tetracontane (100 mg) | 1800091 | 4181-95-7 | 100 mg | Analytical Reference Material |
| 170 | Tetracosane (100 mg) (n-Tetracosane) | 1800219 | 646-31-1 | 100 mg | Analytical Reference Material |
| 171 | Hexadecane (25 mg) (n-Hexadecane) | 1800138 | 544-76-3 | 25 mg | Analytical Reference Material |
| 172 | Diethylhexyl Sebacate (25 mg) (Bis(2-ethylhexyl) decanedioate) | 1800121 | 122-62-3 | 25 mg | Analytical Reference Material |
| 173 | Desiccant, Small (2 pouches (approximate weight 44 grams, each)) | 1613010 | 1318-02-1 | - | Reference Standard |
| 174 | 2-Methyl-4'-(methylthio)-2-morpholinopropiophenone (100 mg) | 1800206 | 71868-10-5 | 100 mg | Analytical Reference Material |
| 175 | Bisphenol A (200 mg) | 1075892 | 80-05-7 | 200 mg | Reference Standard |
| 176 | Plastic Additive 12 (100 mg) (Oleamide) | 1545034 | 301-02-0 | 100 mg | Reference Standard |
| 177 | Polyethylene Glycol 1000 (1 g) | 1546489 | 25322-68-3 | 1 g | Reference Standard |
| 178 | 8-Methylheptadecane (25 mg) (8-Methylheptadecane) | 1800062 | 13287-23-5 | 25 mg | Analytical Reference Material |
| 179 | Plastic Additive 2 (200 mg) (pentaerythrityl tetrakis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate]) | 1544938 | 6683-19-8 | 200 mg | Reference Standard |
| 180 | Cyclododecane (100 mg) (Cyclododecane) | 1800229 | 294-62-2 | 100 mg | Analytical Reference Material |
| 181 | Di-N-octyl Phthalate (25 mg) (Dioctyl Phthalate) | 1800119 | 117-84-0 | 25 mg | Analytical Reference Material |
| 182 | Plastic Additive 14 (100 mg) (Di(2-ethylhexyl) phthalate) | 1545056 | 117-81-7 | 100 mg | Reference Standard |
| 183 | Glyceryl 1-Palmitate (100 mg) (2,3-Dihydroxypropyl palmitate) | 1800201 | 542-44-9 | 100 mg | Analytical Reference Material |
| 184 | 4-(2-Hydroxyethoxy)phenyl 2-Hydroxy-2-propyl ketone (100 mg) (2-Hydroxy-1-[4-(2-hydroxyethoxy)phenyl]-2-methylpropan-1-one) | 1800190 | 106797-53-9 | 100 mg | Analytical Reference Material |
| 185 | Residual Solvent Class 2 - Methylisobutylketone (3 x 1.2 mL) | 1601452 | 108-10-1 | 3 x 1.2 mL | Reference Standard |
| 186 | Diphenylamine (25 mg) (N-Phenylbenzenamine) | 1800176 | 122-39-4 | 25 mg | Analytical Reference Material |
| 187 | Residual Solvent Class 2 - N,N-Dimethylformamide (1.2 mL/ampule; 3 ampules) | 1601500 | 68-12-2 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 188 | Theophylline Melting Point Standard (2 x 500 mg) (Approximately 271 degrees) | 1653117 | 58-55-9 | 2 x 500 mg | Reference Standard |
| 189 | Residual Solvent Class 1 - 1,1-Dichloroethene (1.2 mL/ampule; 3 ampules) | 1601204 | 75-35-4 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 190 | Hexacosane (100 mg) (n-Hexacosane) | 1800167 | 630-01-3 | 100 mg | Analytical Reference Material |
| 191 | Extractable & Leachable System Suitability Standards Direct GC-MS Mixture (1 mL) | 1800490 | - | 1 mL | Analytical Reference Material |
| 192 | Ethylhexyl Acetate (25 mg) (2-Ethyl-1-hexanol acetate) | 1800185 | 103-09-3 | 25 mg | Analytical Reference Material |
| 193 | Polyamide 6 (1 g) | 1372344 | 25038-54-4 | 1 g | Reference Standard |
| 194 | Diisobutyl Carbonate (25 mg) (Diisobutyl carbonate) | 1800137 | 539-92-4 | 25 mg | Analytical Reference Material |
| 195 | Formic Acid (1.2 mL/ampule; 3 ampules) | 1283200 | 64-18-6 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 196 | 1-Pentanol (1.2 mL/ampule; 3 ampules) | 1504955 | 71-41-0 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 197 | Ethyl Formate (1.2 mL/ampule; 3 ampules) | 1265606 | 109-94-4 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 198 | 3-Methylheptadecane (25 mg) (3-methylheptadecane) | 1800143 | 6418-44-6 | 25 mg | Analytical Reference Material |
| 199 | N-Nitrosodimethylamine (NDMA) (1 mL (1 mg/mL)) (N-Methyl-N-nitrosomethanamine) | 1466674 | 62-75-9 | 1 mg/mL | Reference Standard |
| 200 | Plastic Additive 16 (100 mg) (Epoxidized Linseed Oil) | 1545078 | 8016-11-3 | 100 mg | Reference Standard |
| 201 | Dodecylcyclohexane (100 mg) | 1800066 | 1795-17-1 | 100 mg | Analytical Reference Material |
| 202 | Residual Solvent Class 2 - Formamide (1.2 mL/ampule; 3 ampules) | 1601587 | - | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 203 | 2-Benzyl-2-(dimethylamino)-1-[4-(morpholin-4-yl)phenyl]butan-1-one (100 mg) (2-Benzyl-2-(dimethylamino)-1-(4-morpholinophenyl)butan-1-one) | 1800194 | 119313-12-1 | 100 mg | Analytical Reference Material |
| 204 | Residual Solvent Class 2 - Chlorobenzene (1.2 mL/ampule; 3 ampules) | 1601361 | 108-90-7 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 205 | Vanillin Melting Point Standard (1 g) | 1711009 | 121-33-5 | 1 g | Reference Standard |
| 206 | Naphthalene (200 mg) | 1457083 | 91-20-3 | 200 mg | Reference Standard |
| 207 | Lauramide (100 mg) (Dodecanamide) | 1800117 | 1120-16-7 | 100 mg | Analytical Reference Material |
| 208 | Eicosane (100 mg) (Icosane) | 1800175 | 112-95-8 | 100 mg | Analytical Reference Material |
| 209 | 4-Methyloctane (25 mg) (4-Methyloctane) | 1800069 | 2216-34-4 | 25 mg | Analytical Reference Material |
| 210 | Enverify(TM) Viable Surface Sampling Competency Kit (INTERNATIONAL COLD CHAIN SHIPMENT REQUIRED) | 1800255 | N/A | - | - |
| 211 | Residual Solvent Class 2 - Toluene (1.2 mL/ampule; 3 ampules) | 1601805 | - | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 212 | Isopropyl Myristate (5 x 100 mg) | 1350400 | 110-27-0 | 5 x 100 mg | Reference Standard |
| 213 | 2,4-Dimethylundecane (25 mg) (2,4-dimethylundecane) | 1800065 | 17312-80-0 | 25 mg | Analytical Reference Material |
| 214 | 1-Butanol (1.2 mL/ampule; 3 ampules) | 1081807 | 71-36-3 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 215 | Rubber Oligomer 1 (5 mg) (1,1,5,5-tetramethyl-2-(prop-1-en-2-yl)cyclohexane) | 1606221 | 63251-38-7 | 5 mg | Analytical Reference Material |
| 216 | Enverify(TM) Viable Surface Sampling Self-Evaluation Kit (INTERNATIONAL COLD CHAIN SHIPMENT REQUIRED) | 1800494 | - | - | Analytical Reference Material |
| 217 | Cyclic Olefin Polymer (250 mg) | 1152814 | NA | 250 mg | Reference Standard |
| 218 | Endotoxin (11,000 USP Endotoxin Units) (COLD SHIPMENT REQUIRED) | 1235503 | - | 11,000 USP Endotoxin Units | Reference Standard |
| 219 | Lauryldiethanolamine (25 mg) (2,2'-(dodecylazanediyl)bis(ethan-1-ol)) | 1800159 | 1541-67-9 | 25 mg | Analytical Reference Material |
| 220 | Potassium Nitrate Melting Point Standard (1 g) (Potassium Nitrate) | 1548350 | 7757-79-1 | 1 g | Reference Standard |
| 221 | Rubber Oligomer 4 (5 mg) (1,1,5,5-Tetramethyl-2-(1-chloromethylethenyl)-3-(2,2,4-trimethylpentyl)-cyclohexane) | 1606224 | 2446375-29-5 | 5 mg | Analytical Reference Material |
| 222 | Polyethylene Terephthalate (3 strips (2'' x 2 1/2'' each)) | 1546900 | 25038-59-9 | - | Reference Standard |
| 223 | Hexadecamethylcyclooctasiloxane (25 mg) (2,2,4,4,6,6,8,8,10,10,12,12,14,14,16,16-hexadecamethyl-1,3,5,7,9,11,13,15-octaoxa-2,4,6,8,10,12,14,16-octasilacyclohexadecane) | 1800073 | 556-68-3 | 25 mg | Analytical Reference Material |
| 224 | Capric Alcohol (5 x 30 mg) | 1091028 | 112-30-1 | 5 x 30 mg | Reference Standard |
| 225 | Toluene-2,4-Diamine (25 mg) (4-Methylbenzene-1,3-diamine) | 1800148 | 95-80-7 | 25 mg | Analytical Reference Material |
| 226 | Plastic Additive 5 (200 mg) (Tris(2,4-di-tert-butylphenyl) phosphite) | 1544964 | 31570-04-4 | 200 mg | Reference Standard |
| 227 | Plastic Additive 10 (100 mg) (dioctadecyl 3,3'-thiodipropionate) | 1545012 | 693-36-7 | 100 mg | Reference Standard |
| 228 | Methyl Ethyl Ketone (1.2 mL/ampule; 3 ampules) | 1430101 | 78-93-3 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 229 | Residual Solvent Class 2 - Methanol (1.2 mL/ampule; 3 ampules) | 1601623 | - | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 230 | 2-Ethylhexanoic Acid (25 mg) (alpha-Ethylhexanoic acid) | 1800198 | 149-57-5 | 25 mg | Analytical Reference Material |
| 231 | Nonacosane (100 mg) (Nonacosane) | 1800169 | 630-03-5 | 100 mg | Analytical Reference Material |
| 232 | 1,16-Dichlorohexadecane (25 mg) (1,16-dichlorohexadecane) | 1800111 | 7735-39-9 | 25 mg | Analytical Reference Material |
| 233 | Pentaerythrityl Triacrylate (25 mg) (Pentaerythritol triacrylate) | 1800133 | 3524-68-3 | 25 mg | Analytical Reference Material |
| 234 | Plastic Additive 3 (200 mg) (2,2',2'',6,6',6''-hexa-tert-butyl-4,4',4''-[(2,4,6-trimethyl-1,3,5-benzenetriyl)trismethylene]triphenol) | 1544949 | 1709-70-2 | 200 mg | Reference Standard |
| 235 | Methyl Acetate (1.2 mL/ampule; 3 ampules) | 1424051 | 79-20-9 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 236 | Butyl Acetate (1.2 mL/ampule; 3 ampules) | 1082606 | 123-86-4 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 237 | Residual Solvent Class 2 - Cyclopentyl Methyl Ether (1.2 mL/ampule; 3 ampules) | 1601416 | 5614-37-9 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 238 | Diisobutyl Phthalate (25 mg) (1,2-Benzenedicarboxylic acid diisobutyl ester) | 1800081 | 84-69-5 | 25 mg | Analytical Reference Material |
| 239 | (11Z)-11-Eicosenamide (25 mg) ((Z)-icos-11-enamide) | 1800116 | 10436-08-5 | 25 mg | Analytical Reference Material |
| 240 | 1-Iodooctadecane (25 mg) (1-Octadecyl iodide) | 1800080 | 629-93-6 | 25 mg | Analytical Reference Material |
| 241 | Residual Solvent Class 2 - Trichloroethylene (1.2 mL/ampule; 3 ampules) | 1601827 | 79-01-6 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 242 | Methyl Palmitate (3 x 100 mg) | 1431603 | 112-39-0 | 3 x 100 mg | Reference Standard |
| 243 | Instant Inoculator(TM) <100 MultiDose, Clostridium sporogenes USP-CS1 (INTERNATIONAL COLD CHAIN SHIPMENT REQUIRED) | 1800262 | - | - | Analytical Reference Material |
| 244 | Particle Count Set (2 blanks (28 mL each) and 2 suspensions (25 mL each)) | 1500502 | - | 28 mL each | Reference Standard |
| 245 | Oleic Acid (1 g) | 1478130 | 112-80-1 | 1 g | Reference Standard |
| 246 | Extractable & Leachable System Suitability Standards LC-MS-APCI Mixture (1 mL) | 1800501 | - | 1 mL | Analytical Reference Material |
| 247 | Myristic Acid (200 mg) | 1448990 | 544-63-8 | 200 mg | Reference Standard |
| 248 | Dibutyl Sebacate (1 mL) | 1187091 | 109-43-3 | 1 mL | Reference Standard |
| 249 | 2-Octanone (25 mg) (2-Oxooctane) | 1800152 | 111-13-7 | 25 mg | Analytical Reference Material |
| 250 | Isooctyl Phthalate (25 mg) (bis(6-methylheptyl) phthalate) | 1800132 | 27554-26-3 | 25 mg | Analytical Reference Material |
| 251 | Pentane (1.2 mL/ampule; 3 ampules) | 1504933 | 109-66-0 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 252 | Instant Inoculator(TM) <100 MultiDose, Escherichia coli USP-EC1 (INTERNATIONAL COLD CHAIN SHIPMENT REQUIRED) | 1800261 | - | - | Analytical Reference Material |
| 253 | 4,6-Dimethyldodecane (25 mg) (4,6-dimethyldodecane) | 1800077 | 61141-72-8 | 25 mg | Analytical Reference Material |
| 254 | Plastic Additive 6 (200 mg) (1,3,5-Tris(3,5-di-tert-butyl-4-hydroxybenzyl)-s-triazine-2,4,6(1H,3H,5H)-trione) | 1544971 | 27676-62-6 | 200 mg | Reference Standard |
| 255 | Heptane (1.2 mL/ampule; 3 ampules) | 1304209 | 142-82-5 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 256 | 1-Propanol (1.2 mL/ampule; 3 ampules) | 1570406 | 71-23-8 | 1.2 mL/ampule; 3 ampules | Reference Standard |
| 257 | Nonylcyclopropane (25 mg) (nonylcyclopropane) | 1800110 | 74663-85-7 | 25 mg | Analytical Reference Material |
| 258 | 2,4-Di-tert-butylphenol (25 mg) (2,4-Bis(1,1-dimethylethyl)phenol) | 1800083 | 96-76-4 | 25 mg | Analytical Reference Material |
| 259 | Instant Inoculator(TM) <100 MultiDose, Aspergillus brasiliensis USP-AB1 (INTERNATIONAL COLD CHAIN SHIPMENT REQUIRED) | 1800260 | N/A | - | - |
| 260 | Polyvinyl Chloride (100 mg) | 1548076 | 9002-86-2 | 100 mg | Reference Standard |
| 261 | Poly(ethylene-vinyl acetate) (1 g) | 1548010 | 24937-78-8 | 1 g | Reference Standard |
| 262 | 3,5-Di-tert-butylphenol (100 mg) | 1800060 | 1138-52-9 | 100 mg | Analytical Reference Material |
| 263 | Dibutyl Oxalate (25 mg) (Ethanedioic acid, 1,2-dibutyl ester) | 1800068 | 2050-60-4 | 25 mg | Analytical Reference Material |
| 264 | Stearic Acid (500 mg) | 1621008 | 57-11-4 | 500 mg | Reference Standard |
| 265 | 1,4-Benzoquinone (200 mg) | 1056504 | 106-51-4 | 200 mg | Reference Standard |
견적 문의
후사이언티픽은 위 USP 표준품 전체 품목에 대해 정품 공급 가능 여부, 국내 재고 확인, 해외 sourcing, 납기 확인, 단종품 sourcing, 대체품 제안, 스펙 비교, 빠른 견적을 지원합니다.
문의 시 제품명 / 제품번호 / CAS No. / 용량 / 필요 수량 / 희망 납기를 함께 전달해 주시면 보다 빠르게 확인 가능합니다. 소량 구매부터 Bulk 공급, 긴급 수입 대응, 수입 대행, 연구용 시약부터 생산용 화학 원료까지 폭넓게 대응 가능합니다.
잔류용매 표준품, HPLC용 용매, SOLVENT, 분석용 용매, 고순도 시약, Lab Chemical, Reagent, Chemical Raw Material, 실험실 시약, 화학 원료, 화학물질, 약품, 초자류, 연구소장비, 분석 장비, 실험 장비, 연구소 소모품까지 One-stop 공급 문의가 가능합니다.
안내: 상기 브랜드 및 제품은 제공 자료 기준으로 정리된 일부 공급 가능 품목이며, 이외 다양한 브랜드 및 제품도 대응 가능합니다. 궁금하신 제품은 전화 또는 메일로 편하게 문의 바랍니다.
상기 정보는 제조사 및 제공 자료를 바탕으로 작성되었으며, 작성 중 오류가 있을 수 있습니다. 실제 발주 전 제품번호, CAS No., 용량, 보관 조건, 운송 조건, 재고 및 가격은 최종 확인이 필요합니다.
- 의료기기, 화장품, 화학류, 식품 제조에 필요한 화학 케미칼 원료 기업
- 바이오, 2차전지, 신약, 표준물질 등 기업 부설 연구소
- 서울대, KAIST, 성균관대, 경희대, 아주대, 경기대, 한국기술교육대 등 국내 유수의 대학교 연구실
화학, 케미칼, 실험시약, 제조원료, 표준물질, 연구실 소모품이 필요한 기업 및 연구실에
후사이언티픽이 함께 합니다.
국내 제조사 제품 1-2일!
해외 제조사 관련 제품 3-5일!
Vanadyl sulfate hydrate CAS 27774-13-6 및 Vanadium(V) oxide CAS 1314-62-1 VRFB 전해질 합성 원료 공급·견적 안내
안녕하세요, 후사이언티픽입니다. 최근 ESS 및 장주기 에너지저장장치 분야에서 문의가 증가하고 있는 Vanadyl sulfate hydrate CAS 27774-13-6 및 Vanadium(V) oxide CAS 1314-62-1 기반 VRFB 전해질 합성 원료에 대해
hoopic.tistory.com
2026.04.09 - [제품정보] - 바이오 공정용 화학 원료 기술자료: 염화나트륨, 인산염 완충제, 황산염 안정화제, 요소 제품 정리